Filters
Category
- Control Unit Rebuild
- Control Units
- Gear Reduction
- Pressure Gauges
- Pump Oil
- Pump Rebuild Kits
- Pumps
- Rebuild Kits
- Spare Parts
Drive
Manufacturer
Pump Type
Pumps & Control Units
With so many different pumps available, the options can be confusing. Our goal is not just to sell you a pump, we want to help you choose the right pump for your application. We welcome your phone call to discuss your application needs. Listed below are several pump brands we stock. For a full selection from each manufacture please use the filters to the left.
If you're not sure which brand would best suit your needs, a quick overview of each brand is below.
- Udor - Diaphragm and plunger pumps for a wide range of spraying needs.
- Hypro - Numerous pump types including roller, piston and diaphragm pumps.
- Shurflo - Electric diaphragm pumps that are available in 12v and 110v options.
- Banjo - Centrifugal pumps.
- Flojet - Electric diaphragm pumps.
- Ace - Centrifugal pumps, commonly found on agricultural equipment.
- Pacer - Poly Centrifugal pumps such as transfer pumps, used in agriculture.
Each brand offers an extensive selection that is readily available. Due to the vast selection of pumps and replacement parts, our entire selection is yet to be all online. If there is a specific pump or part you are looking that is not listed online please call us, we'd be more than happy to help.
Banjo 5 Vane Impeller
Part # 12772 is the replacement 5 vane impeller off most 2" banjo centrifugal pumps. Be sure to check the parts breakdown on your specific model to...
View full detailsUdor Kappa 35/55 Manifold Cover
Part # 0501.85 is manifold cover on the Kappa 35 and Kappa 55.
Flojet R8400-134A 4.0 GPM
With pressures up to 70 PSI, self-priming capabilities up to 10 feet, and heavier duty brushes extending the operating life up to 50% longer than e...
View full detailsHypro D1064 Diaphragm Kit
Diaphragm kit 9910-Kit2480 includes all parts needed to replace diaphragms on the Hypro D1064 pump. Hypro recommends changing diaphragms every 500 ...
View full detailsHypro D30 Valve Kit
Hypro part # 9910-Kit1917 is the replacement valve kit for the Hypro D30 diaphragm pump. Valves become worn over time which can affect the overall ...
View full detailsHypro D503 Diaphragm Kit
Diaphragm Kit 9910-Kit1881 is used to rebuild to Hypro D503. Hypro recommends changing the diaphragms every 500 hours or three months. whichever co...
View full detailsUdor RO-110/130 Diaphragm Kit - 8700.04
Part number 8700.04 has been superseded by 6062.H2 is the replacement diaphragm kit for the Udor RO-110/130 pumps. Udor recommends replacing the di...
View full detailsGR40 Regulator
This control unit, for mounting on AR & older Hypro pump models AR303 and AR403, is capable of handling flow rates up to 10.6 gpm and pressures...
View full detailsPacer 3 Vane Impeller, S Series Pumps 58-0704-30
Pacer Part # 58-0704-30 is the replacement 3 vane impeller for Pacer S Series pumps with a 3/4" shaft.
Udor Delta 140 Diaphragm Kit 6062.H5 GreenTech
Part # 6062.H5 is the replacement diaphragm kit for the Udor Delta 140 diaphragm pumps. Udor recommends replacing the pump diaphragms after 500 hou...
View full detailsAR 250, 215, 280 Diaphragm Kit - AR43261
Part # AR43261 is the replacement diaphragm kit for the AR250, AR215 and AR280 diaphragm pumps. AR recommends changing the diaphragms every 500 hou...
View full detailsBanjo 12999AV Seal Kit Viton
Part # 12999AV is the replacement seal in Viton kit for Banjo pumps. Check your manual to ensure proper fit.
Ace GE-660-LE Centrifugal Pump
The ace GE-660 Centrifugal pump features a 1-1/2" inlet with a 1-1/4" outlet and is capable of 115 PSI max and 110 GPM max. The impeller connects t...
View full detailsUdor Seal Kit UD-28B
Part # UD-28B has been superseded by 6061.28, it is the replacement seal kit for Udor 18MM M-Series plunger pumps. This kit includes both inlet seals.
Udor Seal Kit UD-11
Part # UD-11 has been superseded by 6061.11, it is the replacement seal kit for Udor 25MM G-Series plunger pumps.
Udor Kappa 55 WOC Diaphragm Pump
The Udor Kappa 55 WOC is the kappa 55 diaphragm pump with no gear reduction or control unit. This pump is commonly purchased to replace a broken pu...
View full detailsHonda GX390 with Delta 75
The Delta 75 and Honda GX 390 electric start 13.0 HP engine is perfect for updating existing spray units. Installing the new pump and engine is a b...
View full detailsUdor Kappa 30/40/75/100 Pump Head
Part# 6017.06 is the replacement head for the kappa 30, kappa 40, kappa 75, and kappa 100. To ensure this pump head fits your Udor diaphragm pump p...
View full detailsAce RK-GE-650 Seal Kit
Part# RK-GE-650 is the rebuild kit for the Ace GE-650 Centrifugal Pumps.
Hypro GR40 regulator Repair Kit
If your pump is not building pressure as it once was you may need to rebuild the regulator. The Hypro GR40 regulator uses part# 9910-Kit2488 as the...
View full detailsHypro D403 Valve Kit
Hypro 9910-Kit2388 is the valve replacement kit for the Hypro D303 and D403 diaphragm pumps. Pump valves may become worn over time which will affec...
View full detailsHypro D503 Valve Kit
Hypro 9910-Kit1987 is the replacement valve kit for the Hypro D503 diaphragm pump. Pump valves may become worn over time which will affect the pump...
View full detailsHypro D160 Diaphragm Kit
Hypro rebuild kit 9910-Kit1730 is the replacement diaphragm kit for the D160 diaphragm pump. Hypro recommends changing the diaphragms every 500 hou...
View full detailsHypro D115/D135 Diaphragm Kit
Hypro rebuild kit 9910-Kit1721 is the replacement diaphragm kit for the D115 and D135 diaphragm pumps. Hypro recommends changing the diaphragms eve...
View full detailsUdor 6010.23 Regulator Rebuild Kit - 8701.01
Udor part # 8701.01 rebuild kit replaces the main internals on the Udor 6010.23 control units. These control units are found on the Iota-20 diaphra...
View full detailsUdor Beta-150 Diaphragm Kit – 8700.07
Part # 8700.07 is the replacement diaphragm kit for the Udor Beta-150 and Omega-170 diaphragm pumps. Udor recommends diaphragm replacement after 50...
View full detailsHypro Centrifugal Pump Seal Kit
If you need to rebuild your Hypro centrifugal pump part # 3430-0332 may fit your pump. This seal kit fits a variety of Hypro pumps including the 92...
View full detailsFlojet 4300-043A 115v Pump
FLOJET Industrial Quad Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling ...
View full detailsKappa-120/150 Complete Repair Kit - 8700.22CK
Udor part 8700.22CK is a complete rebuild kit for the Kappa-120 and Kappa-150 diaphragm pumps. Udor recommends replacing the pump diaphragms after ...
View full detailsUdor Delta 75 Valve Kit - 6062.E6
6062.E6 is the replacement valve kit for the Delta-75 pumps. The kit includes 6 new valves (6063.04) and 6 valve o-rings (1101.31).
Pacer Pumps 58-702EP-U Rebuild Kit
Part Part # 58-702EP-U is the entire internals to rebuild the S series pacer pumps with 5 vane impeller. This kit includes all internal components ...
View full detailsAR 45 Diaphragm Kit - AR43239 BlueFlex
Part # AR43239 is the BlueFlex diaphragm kit for the AR45 diaphragm pump. When diaphragms rupture the oil in the reservoir will turn a milky color....
View full detailsGI30, GI40 Regulator Rebuild - AR1757
Part # AR1757 is the GI30, GI40 and GIC40 regulator rebuild kit. AR1757 will also rebuild the Hypro GS40 regulator.
AR 160, AR 185 Diaphragm Kit - AR43257
Part # AR43257 is the replacement diaphragm kit for the AR160 and AR185 diaphragm pumps. AR recommends changing the diaphragms every 500 hours or t...
View full detailsAR252-GR-GCI3/4 Diaphragm Pump
The AR252-GC-GCI3/4 is a medium pressure, two diaphragm pump commonly used for lawn care and turf spraying applications. This pump assembly comes c...
View full detailsAR50 Replacement Valves
AR1920 is the replacement valve kit for the AR50 diaphragm pump. Valves may become worn over time which will affect the pump performance. A common ...
View full detailsAR30 Replacement Valves
Part # AR1917 is the replacement valve kit for the AR 30 & AR40 diaphragm pumps. Valves become worn over time which can affect the overall perf...
View full detailsAR30/40 Diaphragm Kit
AR43283 is the replacement diaphragm kit for the AR30 & AR40 diaphragm pumps. AR recommends changing the diaphragms every 500 hours. The kit in...
View full detailsAR 252 Diaphragm Kit
Part # AR4327 is the diaphragm rebuild kit for the AR 252 diaphragm pump. AR recommends changing the diaphragms every 500 hours or three months, wh...
View full detailsUdor Seal Kit UD-12
Part # UD-12 has been superseded by 6061.12 is the replacement seal kit for Udor 28MM G-Series plunger pumps.